You have 0 items in your cart.
Products
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
WM-100 | Wall mount for the Therm•A•lert, Therm•A•lert-RH or Therm•A•lert-P data loggers. | Mounting Kits |
|
|
|
Waterbox110C | The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread... | Mounting Kits |
|
|
|
Waterbox101A | The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use,... | Mounting Kits |
|
|
|
SHOCK-MAG-KIT | Magnetic mounting kit for the Shock101, UltraShock, and TSR101. | Mounting Kits |
|
|
|
SHOCK-EB-MAG-KIT | Magnetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB. | Mounting Kits |
|
|
|
MagMount-1 | The MagMount-1 is a magnetic holder for use with the PR140, HiTemp140 series and 1000 series data loggers. The device can be placed in environments from -80°C to +80°C, making it ideal for use in refrigerators, freezers, and incubators. | Mounting Kits |
|
|
|
LUER-FITTING-F | The LUER-FITTING-F is a 1/8” NPT to female luer lock adapter. It can be used with the PR140 data logger with NPT Port. The LUER-FITTING-F can easily be screwed into the 1/8” NPT female port on the data logger. This rugged adapter is made of 316 stainless steel construction and can withstand harsh environments, such as steam sterilization cycles. | Mounting Kits |
|
|
|
Level-Filter | Filter for the Level1000 and Level2000 Data Loggers. | Mounting Kits |
|
|
|
Key Ring End Cap | This is an optional "Key Ring" end cap for use with the PR140, RHTemp1000 or HiTemp140 series data loggers. Easily attaches to your key ring or lanyard. Warning: Using a key ring end cap on IS rated products voids the IS rating unless installed by manufacturer. | Mounting Kits |
|
|
|
Fluke 773 Milliamp Process Clamp Meter | DC voltage measurement to verify 24 V power supplies or voltage I/O signals Source DC voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA... | AC Leakage Clamp Meter |
|
|
|
Fluke 772 Milliamp Process Clamp Meter | Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clamp meter Source 4 to 20 mA signals for testing control system I/O or I/Ps Simulate 4 to 20 mA signals for testing control system I/O Measure 4 to 20 mA signals with in-circuit measurement Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters Source mA output signals in a linear ramp or 25 % step output– Automatically... | AC Leakage Clamp Meter |
|
|
|
Fluke 771 Milliamp Process Clamp Meter | Measure mA signals for PLC and control system analog I/O Measure 4 to 20 mA output signals from transmitters without breaking the loop Best in class 0.2 % accuracy Resolution and sensitivity to 0.01 mA Hold function captures and displays changing measurements Dual backlit display with both mA measurement and percent of 4 to 20 mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with extension cable for measurements in tight locations... | AC Leakage Clamp Meter |
|
|
|
Fluke 902 True-rms HVAC Clamp Meter | Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements Small body and jaws fit perfectly in your hand and into tight places Handy 'Display Hold' button keeps measurements on the display Meter controls are positioned so current measurements can be done with one hand (index finger on clamp opening lever and thumb on rotary switch) Large, backlit display (on most models) is easy-to-see Auto shut-off maximizes battery life so the meter works when... | AC Leakage Clamp Meter |
|
|
|
Fluke 345 Power Quality Clamp Meter | AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit Highest safety rating: 600 V CAT IV power analyzer is rated for use at the service entrance Accurate in noisy environments: Clamp meter performs even with distorted waveforms present on electronic loads with low-pass filter Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month, including harmonics Verify... | AC Leakage Clamp Meter |
|
|
|
Fluke 360 AC Leakage Clamp Meter | Measurement of leakage current with 3 mA range and 1 µA of resolution, for accurate monitoring of insulation erosion Broad range of measurement, from 1 µA up to 60 A, for all installation needs Advanced shielding to ensure accurate results when measuring near other conductors The high durability clamp construction can withstand over 50,000 operations - added ruggedness that extends the life of your clamp Easy-to-carry, pocket-sized clamp with wide 40 mm (1.5 in) jaw size Handy... | AC Leakage Clamp Meter |
|
|
|
Fluke 381 Remote Display True-rms AC/DC Clamp Meter with 18-inch iFlex | 1000 A AC/DC current measurement with fixed jaw 2500 A AC current measurement with iFlex flexible current probe 1000 V ac and dc voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Frequency measurement to 500 Hz with both jaw and iFlex 60 kΩ resistance measurement with continuity detection Min, max, average and inrush recording to capture variations automatically Wireless technology allows the display to be carried up to 30 ft away from... | AC Leakage Clamp Meter |
|
|
|
Fluke 376 1000A/1000V True-RMS AC/DC Clamp Meters | 1000 A AC and DC current measurement with fixed jaw 2500 A AC current measurement with iFlex flexible current probe 1000 V AC and DC voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Frequency measurement to 500 Hz with both jaw and iFlex 60 kΩ resistance measurement with continuity detection Min, max, average and inrush recording to capture variations automatically 500 mV dc measurement range to interface with other accessories 1000... | AC Leakage Clamp Meter |
|
|
|
Fluke 375 600A/600V True-RMS AC/DC Clamp Meter with Frequency Measurement | 600A AC and DC current measurement with fixed jaw 2500 A ac current measurement with iFlex flexible current probe (sold separately) 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement to 60 kΩ with continuity detection Min, max, average and inrush recording to capture variations automatically 500 mV dc measurement range to interface with other CAT IV 600V, CAT III 1000 V safety rating Frequency... | AC Leakage Clamp Meter |
|
|
|
Fluke 374 600A/600V True-RMS AC/DC Clamp Meter | 600A AC and DC current measurement with fixed jaw 2500 A ac current measurement with iFlex flexible current probe (sold separately) 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement of 6000 Ω with continuity detection Min, max, average and inrush recording to capture variations automatically 500 mV dc measurement range to interface with other CAT IV 600V, CAT III 1000 V safety rating iFlex... | AC Leakage Clamp Meter |
|
|
|
Fluke 355 AC/DC TRMS 2000 A Clamp Meter | Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc The large 58 mm (2.3 in) jaw capacity is suitable for large, or multiple conductors CAT IV 600 V, CAT III 1000 V rating for added user protection In-rush current measurement captures 'power-on' surge current with accuracy and repeatability Accurately measure frequency up to 1 kHz for optimum troubleshooting Quickly analyze readings using the MIN, MAX, and AVG functions A... | AC Leakage Clamp Meter |
|