Products

Sub Categories

  • Filter
  Name SKU Description Category
TST0076-460 laser tachometer from Germany (Non-contact only) TST0076-460 rpm measuring instrument incl. protective cap, batteries and calibration protocol TST0076-460; rpm measuring instrument incl. protective cap, batteries and calibration protocol Optically measures rpm, e.g. of ventilators and shafts. The measurement spot is displayed on the measurement object with an LED marking. Max./min. values are displayed directly at the press of a button. The backlit display allows the measurement values to be easily read out, even in unfavourable light... Tachometer/Stroboscopes
LUM002 PLS-200T HIGH TECHNOLOGY STROBOSCOPE (LED) AND TACHOMETER-COMPLETE SET   * High quality product with 2 years warranty. LED VS XENON - It can measure 10 times wider range with the much higher emission frequency at the FPM of 500,000 FPM, than that of 30,000FPM of Xenon Lamp - It can use for a long time with lamp life over 10,000 hours - It can measure area at the RPM of 15~250,000(used Double RPM Check) with the FPM of 15~500,000 - It is very bright because using white power LED through over-current control Reliability of Measurement - Realizing... Tachometer/Stroboscopes
TEN009- YF-10004V3 BEGINNER MULTIMETER Digital Multimeter(DMM)
CEN0043C-1224V2 AUTORANGING TRMS DATALOGGING DIGITAL MULTIMETER W/PC INTERFACE,USB True RMS 32000 records Datalogger Backlit LCD Shock absorbing holster 1ms Peak (Max/Min) function High speed bargraph Digital Multimeter(DMM)
CEN0043B-121 AUTORANGING TRMS DIGITAL MULTIMETER W/PC INTERFACE & TRUE RMS True RMS Backlit LCD Shock absorbing holster 1ms Peak (Max/Min) function High speed bargraph PC interface Digital Multimeter(DMM)
CEN0043A-120 AUTORANGING DIGITAL MULTIMETER W/PC INTERFACE & LED BACKLIGHT Backlit LCD Shock absorbing holster 1ms Peak (Max/Min) function High speed bargraph PC interface Digital Multimeter(DMM)
TEN185- TM-86V2 ECONOMICAL DIGITAL MULTIMETER CAT IV 600V CAT IV 600VLCD Backlit Display, with maximum reading of 3999AC voltage range: 0 to 600V.DC voltage range: 0 to 600V.AC Current range: 0.1A to 10A.DC Current range: 0.1A to 10A.Auto power off (15 minutes).ACV, DCV, ACA, DCA, Resistance, Diode, Frequency, Capacitance, Duty Cycle, Continuity, Range Hold, Data Hold, REL.Accessories. Digital Multimeter(DMM)
TEN186- TM-88V2 DIGITAL TEMP/VOLT/CURRENT/FREQ/OHM MULTIMETER CAT IV 600V COMPLETE WITH TYPE K ADAPTOR CAT IV 600VLCD Backlit Display, with maximum reading of 3999.Analog Bargraph DisplayTrue Rms.AC voltage range: 0 to 1000V.DC voltage range: 0 to 1000V.AC Current range: 0.1µA to 10A.DC Current range: 0.1µA to 10A.Auto power off (15 minutes).Min/Max.ACV, DCV, ACA, DCA, Resistance, Diode, Frequency, Capacitance, Duty Cycle, Continuity, Temperature, Range Hold, Data Hold, REL.Accessories. Digital Multimeter(DMM)
TEN162- TM-72V2 PEN TYPE POCKET DIGITAL BARGRAPH MULTIMETER (PLUS PHASE ROTATION TESTER) CAT IV 600VLCD display with maximum reading of 6000, plus decimal point.Analog Bargraph.AC voltage range: 0 to 600V.DC voltage range: 0 to 600V.Auto power off (15 minutes).Frequency measurement.AC and Frequency measurement with only one test lead.Phase sequence test.Phase conformity test.Continuity test.Double injection outer case. Digital Multimeter(DMM)
SEW0060- PT-30 PEN TYPE DIGITAL MULTIMETERS ACV DCV 600V OHM - PT30 ● Lightweight, compact, and easy to use.● 4000 counts.● Full automatic measurement, voltage measurement, resistor   measurement.● Data hold function.● Auto off function.● Continuity check.● Diode measurement.● Low battery indication.● Pen light provided.● Backlight LCD.● 3V DC power supply. Digital Multimeter(DMM)
CIA425C-AIRFORCE NEW TL532 25MW VISUAL FAULT LOCATOR VFL FIBER OPTIC CABLE TESTER METER 20KM Introduction:The TL531 is specially designed for field personnel who need an efficient and economical tool for fiber tracing,fiber routing and continuity checking in an optical network during and after installation. It includes:Finding the breakpoint, poor connections, bending or cracking in fiber optic cables.Finding the faults of OTDRThe TL531 is specially designed for field personnel who need an efficient and economical tool for fiber tracing,fiber routing and continuity checking in an... Optical power meter
CIA425B-AIRFORCE NEW TL531 10MW VISUAL FAULT LOCATOR FIBER OPTIC CABLE TESTER METER 10-12KM   Introduction:The TL531 is specially designed for field personnel who need an efficient and economical tool for fiber tracing,fiber routing and continuity checking in an optical network during and after installation. It includes:Finding the breakpoint, poor connections, bending or cracking in fiber optic cables.Finding the faults of OTDR.The TL531 is specially designed for field personnel who need an efficient and economical tool for fiber tracing,fiber routing and continuity... Optical power meter
GRL2100-GREENLEE/TEMPO 5890-FC MULTIMODE AND SINGLE MODE FIBER OPTIC TEST SET WITH FC INTERFACE Insertion loss test set for multimode and single mode fiber 850/1300nm Loss measurements 1310/1550nm Loss measurements Connector for FC, SC or ST Rugged package design Easy to use portable package Economically priced Optical power meter
FLU0373-FLUKE FTK1000 FLUKE NETWORKS SIMPLIFIBER PRO MULTIMODE FIBER VERIFICATION KIT Dual-wavelength testing Tests multimode and singlemode fiber Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources Offers quick remote identification of cabling runs with FindFiber Remote IDs Conduct pre-testing and qualify cabling runs Auto-senses source... Optical power meter
CIA410-TL510A OPTICAL POWER METER WITH FC SC ST CONNECTOR -70~+10DBM FOR TELECOM TEST TL510A Mini handheld optical power meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers.It features ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio Optical power meter
CIA420-AIRFORCE TLD6070B FIBER OPTIC TYPE 50A HANDLE OPTICAL POWER METER -50~+26 DBM Power Meter TLD6070 series with a chip microcomputer control and the large-screen graphics LCD, it can provide precision measurement from 850 to 1625nm wavelength ranges and measuring range including -70 dBm to +6 dBm, -50 dBm to +26 dBm. Optical power meter can test the PM power to the light, light stability, insertion loss, optical transmittance, reflectance of light and so on. It widely used in optical fiber communications, CATV, Fiber Optical Sensors etc. It is indispensable for scientific... Optical power meter
AMI017 - WHT20P SERIES WEBSTER HARDNESS TESTER (With MAX, AVE)     Product Description                                                                                                                                              This series Wechsler hardness tester is an instrument that can quickly test the hardness of aluminum alloy in the field. Wechsler hardness tester is easy to use,One card can, hardness value directly read. Used for rapid detection of aluminum alloy... Hardness tester