You have 0 items in your cart.
Products
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
GW INSTEK AFG-2000/2100 Series | Features * 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution* Sine, Square, Triangular, Noise and Arbitrary Waveform* 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform * 1% ~ 99% adjustable duty cycle for Square Waveform* Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection* Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously* AM/FM/FSK Modulation, Sweep, and Frequency Counter... | Arbitrary Function Generators |
|
|
|
GW INSTEK SFG-2100/2000 Series | Features *DDS Technique and FPGA Chip Design *Frequency Range : 0.1Hz~4/10MHz *High Frequency Accuracy : ± 20ppm *Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Front Panel Setting Save/Recall with 10 Groups of Setting Memories *Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only)*INT/EXT AM/FM Modulation (SFG-2110 Only)*LIN/LOG Sweep Mode(SFG-2110 Only) | DDS Function Generators |
|
|
|
GW INSTEK SFG-1000 Series | Features *DDS Technique and FPGA Chip Design *Frequency Range:0.1Hz~3MHz *High Frequency Accuracy : ± 20ppm *High Frequency Stability : ± 20ppm *Max. Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Voltage Display (Only SFG-1013) | DDS Function Generators |
|
|
|
GW INSTEK GFG-3015 | Features *Frequency Range 0.01Hz~15MHz *Maximum Frequency Resolution 10mHz *Dual Displays Indicate Frequency and Amplitude *Built-in 6 Digits Counter up to 150MHz/High Resolution *Output Waveforms Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst *INT/EXT AM/FM Modulation *GCV Output for Synchronization *Output Overload Protection | Analog Function Generators |
|
|
|
GW INSTEK GFG-8200A Series | Features *Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)*Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)*Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output*External Voltage Controlled Frequency (VCF) Function *Two-Steps (-20dBx2) and Variable Attenuator *Built-In 6 Digits Counter with INT/EXT Function up to 150MHz(Except GFG-8215A)*INT/EXT AM/FM Modulation (GFG-8219A/8255A)*GCV Output for Synchronization (GFG-8219A/8255A) | Analog Function Generators |
|
|
| GW INSTEK GFG-8020H | Features *Frequency Range : 0.2Hz ~ 2MHz *Coarse and Fine Tuning *Waveform : Sine, Triangle, Square, TTL Pulse *CMOS Output *Built-In 4 Digits Counter (INT Only) *Large 0.5" LED Display *Variable DC Offset Control *Output Overload Protection *VCF Input Function | Analog Function Generators |
|
||
|
GW INSTEK GFG-8015G | Features *Frequency Range : 0.2Hz ~ 2MHz *Waveform : Sine, Triangle, Square, TTL Pulse *Variable DC Offset Control *Output Overload Protection *VCF Input Function *1000 : 1 Tuning Range | Analog Function Generators |
|
|
|
GW INSTEK GSG-120 | Features *Freq Range 100kHz ~ 110MHz *Output Level -19 ~+99 dBu *All Operations are Controlled by Microprocessor *Memory Storage: 10 points in one block(up to 100 continuous points) *and 4 output levels *Memory Data Copy *Back Space key *Remote Control Function(Need the GRC-1201 option) *FM Stereo Modulation (GSG-122 only) | Other Signal Sources |
|
|
|
GW INSTEK GAG-810/809 | Features *Frequency from 10Hz ~ 1MHz *0.02% Low Sine Wave Distortion (GAG-810 Only)*6 Steps Output Attenuator *EXT SYNC Function | Other Signal Sources |
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector | GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... | Digital Controller |
|
|
|
GAS DNA GMS1500 4-Channel digital controller for gas detector | GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can... | Digital Controller |
|
|
|
GAS DNA GMS 2000 Multi-channel digital controller for gas detector | GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to... | Digital Controller |
|
|
|
Center CENTER 25 - Flexible Current Probe | Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. Center 25 is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work. | Flexible_Clamp |
|
|
|
Center CENTER 26 - Flexible Current Meter | The new flexible current probes make your measurement possible where the space is too tight or difficult for clamp meters. Center 26 is composed of a 8.5mm, double-insulated flexible sensor and a True-RMS electronic module with back-lit LCD for accurate and clear reading in all environments. Measurement range from 1 to 3000 A ac, available in 10" and 18" length probe. | Flexible_Clamp |
|
|
|
Center CENTER 20 - Basic Clamp Meter (AC) | We optimized the cost to sell for less but never wanted to sacrifice any performance. The new CENTER 20 is built on quality. It is robust and reliable. The basic clamp meter functions with AC current measurement are more than proficient for most of general electricians or equipment installers in the field. Also, it’s rated 600V CAT III, it is safe to use. | Clamp_Meters |
|
|
|
Center CENTER 21 - Smart Clamp Meter (AC) | With smart detection function, you can care less whether you are measuring AC or DC voltage as it just knows. Moreover, the integrated capacitance, resistance, diode test, and continuity function brings even more conveniences. NCV function also alarms you intuitionally immediate upon detection of voltage. To make your job easier, backlit LCD shows you the bright and clear reading regardless what kind of working condition you are in. CENTER 21 is also rated 600V CAT III. | Clamp_Meters |
|
|
|
Center CENTER 27 - Mid-size Slim Clamp Meter (AC) | Features: 26mm slim and 153g lightweight design True RMS measuring Measuring up to AC 1000A Data hold function Max/Min function Auto ranging Auto power off 600V CATIII | Clamp_Meters |
|
|
|
Center CENTER 28 - Mid-size Slim Clamp Meter (AC) | Features: 26mm slim and 153g lightweight design True RMS measuring Measuring up to AC 1000A Data hold function 1ms peak function Capacitance measurement Frequency measurement from clamp & terminal Auto ranging Auto power off 600V CATIII | Clamp_Meters |
|
|
|
Center CENTER 200 - Mini Clamp Meter (AC) | Features: Pocket size High speed bargraph Data hold function Touch zero function Auto ranging Auto power off Resolution 0.01A, 0.1V Measure frequency from current clamp & test terminal 300V CATIII | Clamp_Meters |
|
|
|
Center CENTER 201 - Mini Clamp Meter (AC/DC) | Features: AC/DC current measurement Pocket size High speed bargraph Data hold function Touch zero function Auto ranging Auto power off Resolution 0.01A, 0.1V Measure frequency from current clamp & test terminal 300V CATIII | Clamp_Meters |
|